TELEWAVE's ANT280S 118 – 3000 MHz Wideband Discone antenna. Omnidirectional, unity gain, with N Male termination and 500 W. Order mount separately, SKU 346945 (ANTC480).

Product Code: 20-542057

Product Code: 20-541618

136 - 960 MHz 2 dBi tri-band omni antenna with N Female connector.

Product Code: 20-542069

Product Code: 20-541617

Product Code: 20-541616

150-168 MHz, Unity Gain, only 3.5" tall, requires NMO mount.

The ultimate in low-profile VHF-High single-band operation. Won't bend or break.

Product Code: 14-540944

140-174 MHz, 3 element silver series yagi, 7.1dB gain, N female connector, 42" long, 3 lbs., 2" diameter support pipe, u-bolts included. Fantastic VHF gain for a low price.

Product Code: 20-540929

5 element yagi. 9.2 dB directional gain. Gold anodized for longer life, element mount holes are threaded to provide positive RF connection.

Product Code: 20-541559

150-174 MHz, 5 element yagi, field tunable, 9.2dB gain, N-female connector, 6' long, 4 lbs., 100 mph wind rating, 2" diameter support pipe, u-bolds included. Fantastic VHF distance reception.

Product Code: 20-540930

Lightweight, 4 bay exposed dipole. Field adjustable 6 dB omni or 9 dB offset pattern. Can mount on side or top of tower.

Product Code: 20-541567

Economical fiberglass omnidirectional 3 dB gain. Gold anodized support pipe. Ideal for light duty applications.

Product Code: 20-541571

MCA216M is an active multicoupler designed to distribute VHF/UHF antenna signals to sixteen (16) VHF/UHF receivers simultaneously without loss of signal

Product code: 02-532023

Mast is 1-1/2" O.D. and 30" in height. 36" Square.

Product Code: 20-531583

Product Code: 20-541613

Product Code: 20-541614

-Broad Frequency Range
-25 MHz Input High-Pass Filter
-No Signal Loss to Output Ports
-Rugged Cast Aluminum Case

Product Code: 02-530557

Product Code: 02-531894

-820 MHz to 890 MHz
-25 MHz Input High-Pass Filter
-No Signal Loss to Output Ports
-Rugged Cast Aluminum Case

Product Code: 02-531893

Product Code: 20-541615

5 element 9dB black yagi. No tuning required. Seamless aluminum construction, 360 deg. welds, and a powder coated finish give superior durability. Mount hardware incl.

Product Code: 20-541555

Product Code: 20-541627

Gold Fiberglass Base Station antennas are collinear designs enclosed in a high density fiberglass, which is covered with a protective ultraviolet inhibiting coating.

Product Code: 20-541570

Product Code: 20-541624

10.2 dB gain 6 element gold anodized yagi antenna. Solid elements are welded to boom for high durability.

Product Code: 20-541558

6 element yagi. Solid elements have threaded mounting holes for positive lock to boom. 10.2 dB directional gain. Available in black finish.

Product Code: 20-541557

6 element yagi. 10 dB directional gain. Heavy duty.

Product Code: 20-541556

Product Code: 20-541625

Product Code: 20-541631

Product Code: 20-541632

Omnidirectional, fiberglass antenna. Dual skirt dipole design. Uses new Horizon Blue fiberglass radome for minimum tip deflection in high winds. 3dB gain.

Product Code: 20-541569

1 1/4" OD x 60" Pre-Galvanized 18 Gauge Pipe. Swaged at one end.

Product Code: 20-531579

Product Code: 20-531679

Larsen Yagi directional antennas are designed with strengthened aluminum alloys to assure long life and best performance for the most demanding applications.

Product Code: 20-541561

-Broad Frequency Range
-25 MHz Input High-Pass Filter
-No Signal Loss to Output Ports
-Rugged Cast Aluminum Case

Product Code: 02-530558

806-866 MHz, 5db Gain, 19" tall, 5/8 wave with 2 loading coils, requires NMO Mount.

A low-profile powerhouse with superior 800 MHz gain. Perfect for mobile trunktracking scanners.

Product Code: 20-540972

6 element yagi. 9 dB directional gain. 1 piece construction, elements welded to boom. Feed system enclosed. Mounts with one or two u-bolts thru boom.

Product Code: 20-541587

Product Code: 20-541639

elements and boom are manufactured from aircraft quality 6061-T6 aluminum for optimum strength. Antenna is anodized for corrosion resistance.

Product Code: 20-541565

Product Code: 20-541636

806-896 MHz, 6-element, 9db Gain Beam Antenna, gold-anodized, solid aluminum, 28" L x 7" H, 2 lbs, N-female, u-bolt to 1-5/8" pipe. Our best-selling 800 MHz beam antenna.

Product Code: 07-540705

This yagi antenna includes a 19 inch pigtail terminated with an N female connector. U-bolts; maximum mast diameter is 2 1/8 inches are supplied for mounting.

Product Code: 20-541959

TERRAWAVE 806-960 MHz 10 dBi Yagi Antenna. Comes with Articulating mount and 12" pigtail with N- Style Jack.

Product Code: 20-541560

Product Code: 20-541637

TERRAWAVE 824-960 MHz 15 dBi Yagi Antenna. Comes with Articulating Mount & 12" Pigtail with N Jack.

Product Code: 20-541566

Variable attenuator, 1-20dB, 0, 101000 MHz, for scanners, BNC connectors

Product Code: 24-531021

Black Comtelco UHF YAGI,7db 3- ELEMENT 450 470 MHz

Product Code: 33-542003

Flexible Whip rubber ducky design.

• Dual Band UHF 400-470/800MHz
• Flexible Whip Rubber Ducky
  
• Great improvement over factory standard antenna
  
• 9 inch length
  
• BNC Connector

A professional antenna designed for two-way equipment that demands the most signal possible, this is an outstanding 800 MHz antenna. If you're mainly listening to trunking systems at 800 MHz, then this is the antenna for you! 8 inches tall.

Product Code: 14-540714

For all portables except the BCD396T and BR330T. 4 inches tall.

Product Code: 14-541097

Flexible Whip rubber ducky design, minimum +6dB Gain over standard antenna.

• 700~900MHz UHF Band
  
• Flexible Whip Rubber Ducky
  
• Great improvement over factory standard antenna
  
• 7 inch length
  
• BNC Connector

Flexible Whip rubber ducky design, minimum +6dB Gain over standard antenna.

• 700~900MHz UHF Band
  
• Flexible RIGHT ANGLE
  
• Great improvement over factory standard antenna
  
• 8 inch length
  
• BNC Connector

Replacement Uniden antenna for all portable scanner models (with BNC connector). Also works on all other brands of portable scanners with BNC connectors

Product Code: 10-540710

Telescopic replacement whip antenna with adjustable right angled whip suitable for base and handheld scanners

Product Code: 25-541698

• Connector A: BNC Female
• Connector B: BNC Female
• Brass body
• Nickel plated

• Connector A: BNC Female
• Connector B: F Male
• Brass body
• Nickel plated

• Connector A: BNC Female
• Connector B: N Female
• Brass body
• Nickel plated

• Connector A: BNC Female
• Connector B: N Male
• Brass body
• Nickel plated

• Fits LMR-400
• Male Crimp style
• 50 ohm
• 3 piece design (connector, pin and ferrule)

• Connector A/B: BNC Female
• Connector C: BNC Male
• Brass body
• Nickel plated

• Connector A: BNC Male
• Connector B: N Female
• Brass body
• Nickel plated

• Connector A: SMA Female
• Connector B: BNC Male
• Brass body
• Nickel plated

• Connector A: BNC Male
• Connector B: UHF (PL-259) Male
• Brass body
• Nickel plated

• Connector A: BNC Male
• Connector B: BNC Female
• Brass body
• Nickel plated

This professional UHF antenna is tuned for the 450-470 Public Safety, business, and auto racing frequency band. It uses an injection molded helically wound design. The antenna is 1/4 wavelength and has a highly durable strain relief base with a BNC connector for every scanner. It is approximately 3 inches tall, shorter and more durable than the standard rubber-duck antenna.

Product Code: 01-540751

The Remtronix REM-842B VHF/UHF/ BNC 800 MHz. Triband Scanner Antenna

Frequency (MHz): 150-162
Length: 8" Material Injection Molded
Antenna Type : Covered BNC/Helical
Connector: Covered BNC male

Product Code: 20-541794

The W-801 Regular Gainer has been designed to provide a big improvement over the standard flexible whip normally provided with handhelds. High quality engineering and ergonomic design make it a natural replacement.

Product Code: 28-541172

High quality engineering and ergonomic design ensure that it is the natural replacement for those seeking to extend their receiver’s range.

Product Code: 28-541173

The W-889 Tele Gainer gives you the advantage of adjustable length with swivel knuckle joint. As with the other Watson Scanning Antennas, it has been designed to give you the best reception possible.

Product Code: 28-541187

A unique design for the VHF/UHF airband It offers excellent efficiency and can also be used for transmission on the VHF air band.

Product Code: 28-541174

Product Code: 24-531518

Product Code: 24-531519

Shortwave Band-Pass-Filter, 1.6-32 MHz, for scanners and other HF receivers, BNC connectors

Product Code: 24-531023

A 769-872 MHz Public Safety Bandpass Filter helps to reduce frequency-adjacent cellular interference and thus improves, in most cases, reception of public safety communications in the 700 and 800 MHz band.
Product Code: 24-531520

Air-Band-Pass Filter, 112-140 MHz, for scanners, BNC connectors

Product Code: 24-531022

Product Code: 24-531517

VHF Band Pass Filter, 137-174 MHz, for scanners, BNC connectors

Product Code: 24-531041

Product Code: 24-531516

Log Periodic antenna for 30-1000MHz .

Product Code: 40-541276

Wideband log periodic receive/transmit antenna.
50-1300MHz

Product Code: 40-541274

Wideband log periodic receive/transmit antenna.
105-1300MHz

Product Code: 40-541275

Super-charge your reception by feeding your scanner with a wideband and/or multiple band-specific gain antennas!

Super-charge your reception by feeding your scanner with a wideband and/or multiple band-specific gain antennas!
This Co-Phasing Antenna Package is custom built by an Extra Class Ham Operator in the Providence area.
The purpose of co-phasing receiving antennas is to add receiving strength in directions that you may have weak, distorted reception using just a single discone or other type of wideband scanner antenna by allowing you to add multiple antennas to your mast and feeding them with a single coax line.

Super-charge your reception by feeding your scanner with a wideband and/or multiple band-specific gain antennas!
This Co-Phasing Antenna Package is custom built by an Extra Class Ham Operator in the Providence area.
The purpose of co-phasing receiving antennas is to add receiving strength in directions that you may have weak, distorted reception using just a single discone or other type of wideband scanner antenna by allowing you to add multiple antennas to your mast and feeding them with a single coax line.

Super-charge your reception by feeding your scanner with a wideband and/or multiple band-specific gain antennas!
This Co-Phasing Antenna Package is custom built by an Extra Class Ham Operator in the Providence area.
The purpose of co-phasing receiving antennas is to add receiving strength in directions that you may have weak, distorted reception using just a single discone or other type of wideband scanner antenna by allowing you to add multiple antennas to your mast and feeding them with a single coax line.

Solid performance on all bands (although not tuned for VHF-Low), this very low-profile antenna is a favorite in State Police/Highway Patrol circles.

Product Code: 07-540719

This high quality stainless steel, omni-directional discone is the best available for scanners, covering 25-1300MHz.

Product Code: 48-541857

EMR Corp RF Preselectors vary from single or dual cavity resonator combinations, to mult-stage inductive, aperature coupled, or combline filters. Special preselector assemblies may include one or more of these devices in combination, multiple pass and stop band characteristics, and special notch elements according to the complexity of site requrements. EMR preselectors are designed to optimize loss, selectivity, and costs; with respect to the particular site requirements and frequencies.

Product Code: 20-551879

• Connector A: F Female
• Connector B: N Male
• Brass body
• Nickel plated

• Connector A: BNC Male
• Connector B: F Female
• Brass body
• Nickel plated

The "Ferret" is a Multiband Antenna utilizing state of the art engineering techniques. It provides coverage from 25 MHz to 1.8 GHz.

Product Code: 04-540706

Note: This product is non-returnable for credit
Grounding kit to ensure the proper grounding of your wireless systems.

Product Code: 20-531585

Ground Plane Scanner Antenna kit comes with the Comtelco mobile scanner antenna.
(Note antenna mounting pipe not included)

Product Code: 01-541990

Combined Notch Filter for FM broadcast band 87-109 MHz and High-Pass-Filter 0-20 MHz

Product Code: 24-531024

High quality pre-amp with variable gain control and band pass filters to minimize interference. With a BNC Plug on one end and BNC socket on the other, the unit will fit on top of a handheld scanner or in line for use with a base receiver. Fitted band pass filters for much improved performance. Can be powered by its internal battery (one 9-volt battery included) or from 12v Dc.

Product code: 25-531151

Laird Multi Band Mobile Antenna 136-174/380-520/760-870 MHz Antenna w/ Spring

Product Code: 20-541858

3' Light Duty Tripod. Will accept mast up to 1.75" O.D.

Product Code: 20-531582

0-6 GHz Lightning Protector with N Plug to N Bulkhead Jack Connectors. Includes L Shaped Mounting Bracket.

Product Code: 20-531584

LIM-01 is a RF power protection device designed to prevent large and damaging RF power levels destroy sensitive receiving equipment such as multicouplers, pre-amplifiers and scanning receivers

Product code: 02-532024

Note: This product is non-returnable for credit

Product Code: 20-550969

Note: This product is non-returnable for credit


Product Code: 20-550971

Note: This product is non-returnable for credit

Product Code: 20-550970

Note: This product is non-returnable for credit


Product Code: 20-551100

Note: This product is non-returnable for credit

Product Code: 20-550963

Note: This product is non-returnable for credit

Product Code: 20-550965

Note: This product is non-returnable for credit

Product Code: 20-550964

Note: This product is non-returnable for credit

Product Code: 20-550966

Note: This product is non-returnable for credit

Product Code: 20-550968

Note: This product is non-returnable for credit

Product Code: 20-550967

Note: This product is non-returnable for credit


Product Code: 20-551076

Note: This product is non-returnable for credit

Product Code: 20-550961

Note: This product is non-returnable for credit

Product Code: 20-550962

Note: This product is non-returnable for credit


Product Code: 35-551257

Note: This product is non-returnable for credit


Product Code: 35-551258

Low noise antenna preamp. 30-2000 MHz, F-connectors, supply voltage range 11-13V, powered via separate wire.

Product code: 24-531042

Tuned low noise preamp. Range 118-137 MHz, gain typ. 20dB, BNC-connectors, supply 12V via coax.

Product Code: 24-531043

Tuned low noise preamp, range 118-137 MHz, gain typ. 20dB, BNC-connectors, supply 12V via separate wire.

Product Code: 24-531044

Tuned low noise preamp, range 137-174 MHz, gain typ. 20dB, BNC-connectors, supply 12V via separate wire.

Product Code: 24-531045

Low Band Pass Filter, DC - 485 MHz, for scanners, BNC connectors

Product Code: 24-532013

LPF- 512 Low Pass Filter, DC - 512 MHz, for scanners, BNC connectors

Product Code: 24-532014

Product Code: 20-531680

• Connector A: N Female
• Connector B: N Female
• Brass body
• Nickel plated

• Connector A: N Female
• Connector B: SMA Male
• Brass body
• Nickel plated

• Connector A: UHF (PL-259) Female
• Connector B: UHF (PL-259) Female
• Brass body
• Nickel plated

Note: This product is non-returnable for credit
N Male Clamp for LMR-400.

Product Code: 20-531586

3" magnet mount kit prewired with 12' RG58 cable and BNC connector. Designed to handle antennas with Motorola type TAD and TAE, 1 - 1/8" 18 thread connection.

Product Code: 15-541673

5" magnet mount kit prewired with 17' RG58 cable and BNC connector. Designed to handle antennas with Motorola type TAD and TAE, 1 - 1/8" 18 thread connection.

Product Code: 13-540571

The NMO hole mount is supplied with 12 ft of 98% shielded RG-58 cable terminated with a BNC connector. The cable is attached at right angles to the mount (i.e. 90 degrees) and requires a 3/4" hole.

Product Code: 13-540564

This Mirror Mount is supplied with 12 ft of RG-58 cable and a crimp-on BNC. Mounts on vertical or horizontal mirror supports and roof racks.

Product Code: 13-540567

This trunk mount which allows for limited vertical antenna adjustment is supplied with 17 ft of RG-58 cable and a BNC connector. It mounts on a standard trunk lip.

Product Code: 01-540829

The Pre-78 is a commercial/government grade low noise receive pre-amplifier for use in the 700/800 MHz service band.

Product code: 02-532022

Note: This product is non-returnable for credit
All-In-One Combination Prep Tool for prep of LMR400 cables for crimp or clamp connectors.

Product Code: 20-531711

Power exclusively for the LNA-AIR Pre-Amplifier.

Product Code: 24-531289

Note: This product is non-returnable for credit
RG-6 Coax Cable, 100', F Male to F Male

Product Code: 35-551956

Note: This product is non-returnable for credit
RG-6 Coax Cable, 25', F Male to F Male

Product Code: 35-551957

Note: This product is non-returnable for credit
RG-6 Coax Cable, 50', F Male to F Male

Product Code: 35-551851

Note: This product is non-returnable for credit


Product Code: 35-552024

Note: This product is non-returnable for credit


Product Code: 35-551255

Note: This product is non-returnable for credit


Product Code: 35-551256

Note: This product is non-returnable for credit


Product Code: 20-551647

Note: This product is non-returnable for credit


Product Code: 20-551650

Note: This product is non-returnable for credit


Product Code: 20-551648

Note: This product is non-returnable for credit


Product Code: 20-551649

This low-cost discone antenna solution covers all bands from 25 - 1300 MHz for scanners/receive.

Product Code: 15-540715

Flexible Whip rubber ducky design, minimum +6dB Gain over standard antenna.

• 700~900MHz UHF Band
  
• Flexible Whip Rubber Ducky
  
• Great improvement over factory standard antenna
  
• 7 inch length
  
• SMA Connector (Standard SMA)

Flexible Whip rubber ducky design.

• Dual Band UHF 400-470/800MHz
• Flexible Whip Rubber Ducky
  
• Great improvement over factory standard antenna
  
• 9 inch length
  
• SMA Connector (Standard SMA)

A professional antenna designed for two-way equipment that demands the most signal possible, this is an outstanding 800 MHz antenna. If you're mainly listening to trunking systems at 800 MHz, then this is the antenna for you! 8 inches tall. For BC346T, BCD396T, BR330T, BC346XT and BCD396XT

Product Code: 14-541014

This 800 MHz scanner antenna is 1/4 wave and 4.5" tall and will improve reception at 700, 800 and 900 MHz. It has an SMA connector base for the Uniden Bearcat BC346T, BCD396XT, BR330T, BC346XT and BCD396XT scanners. Not that reception on other bands will suffer as compared to the standard rubber-duck antenna..

Product Code: 14-541098

Flexible Whip rubber ducky design, minimum +6dB Gain over standard antenna.

• 700~900MHz UHF Band
  
• Flexible Whip Rubber Ducky
  
• Great improvement over factory standard antenna
  
• 7 inch length
  
• SMA Connector (Standard SMA)

Uniden stock replacement antenna with correct (SMA) connector for the BCD436HP, BCD396T, BCD396XT, BC346XT and BR330T. Does a good job of providing reception across all bands.


Product Code: 10-541225