Home > Antennas > Mobile Antennas > Mobile Mounting Gear >

NMO Hole Mount with Cable & BNC
NMO Hole Mount with Cable & BNC
 
Our Price: $22.95

Stock Status: In Stock


Product Code: 13-540564
Qty:

Basics
 
The NMO hole mount is supplied with 12 ft of 98% shielded RG-58 cable terminated with a BNC connector. The cable is attached at right angles to the mount (i.e. 90 degrees) and requires a 3/8" hole.

NMO Hole Mount - Mounting Instructions

Select a location for mounting the antenna. The best location would be centered on the vehicle roof, although other locations are acceptable. Make sure there is not a roof support in the way when locating preferred location.

For roof mounts, part # TS or TS38, drill a hole or use a Greenlee punch set in the selected location. The size of the hole should be 3/8”.

Place the NMO mount up through the bottom of the hole. Place the threaded nut with inserted rubber O ring on top of the mount, outside of the vehicle and tighten.

Route the cable between the hole or the mount, and the location of the radio.

Screw the antenna into place on top of the vehicle.


Share your knowledge of this product with other customers... Be the first to write a review